The mod uses a different mechanism for “switching” The body carries a contact tube, that is vented, and makes for a permanent contact at the bottom of the mod. There’s a delrin sleeve that goes on top of the battery followed by a coned spring that sits between the delrin battery sleeve and the hybrid, knurled top cap. Although the switch is operated in the conventional way the contact is made at the rda end of the mod. This enabled us to greatly reduce the height of the mod and makes for a nice clean contact every time.
Assembling the EM Mi Mod Please CLICK ON THE LINK and watch the short video of the mod being assembled. It’s important you understand the basic mechanics of the mod and how it goes together.
The contact in the switch sleeve is fully removable for cleaning purposes
The RDA again is a unique 2 post deck. Our aim with this deck was to make it as simple as possible to build on for the inexperienced but give big enough post holes for the more experienced, elaborate builders out there and I think we created the perfect deck for this. Designed to carry a single coil (0.15 ohms and above is recommended to get the best out of the RDA) the semi restrictive air flow, domed internals on the top cap and the small chambers creates exquisite flavour compared to bigger RDAs.
Whats in the box.
EMMi Mod: Mod Body, Contact Sleeve, Delrin Batter Sleeve, Coned Spring, Knurled Hybrid
EMMi RDA: Deck, Top Cap, Spares Set including BF Pin